In this session we’ll be discussing this, along with various condition monitoring techniques, e.g., vibration, oil, IR, ultrasound, and perhaps others, and how and where to best apply them, and as importantly the systems and practices that need to be in place to optimize their performance, e.g., a direct link to the maintenance planning and scheduling process, and a proactive approach to eliminate the defects being detected.
- Ron Moore
- RELIABILITY CONNECT
Software reliability is the probability that software will operate failure-free for a specified period of time in a specified environment. It is an important contributing factor impacting system reliability (which includes hardware and human reliability).
Electrical equipment failures especially motors account for nearly half of facilities downtime, and the difference between a poor Electrical Preventative Maintenance programme and an excellent one is approximately 12 times.
- Mark Gurney
- 3Phi Reliability
As early as the 1960’s, many companies realized that by routinely monitoring the operating condition of rotating equipment it is possible to obtain an advanced warning of operational or other problems that would impact continued efficient operation.
- Bill Kruger
- ALL-TEST Pro
Once you figure out your "Top" priorities you want to accomplish, those need to be broken down into smaller steps to make them easier to tackle. Paul Dufresne will explain how this can be done.
- Paul Dufresne
- Reliability Playbook
When cables between the power supply and the accelerometer are short, less than 100 feet or 30 meters, circuit capacitance usually has no significant effect on the vibration data signals. Long cables may introduce sufficient capacitance into the sensor circuit to allow vibration signal distortion and produce spurious signals.
- Peter Eitnier
- Wilcoxon Sensing Technologies
Supply and value chains have undergone a dramatic shift since early 2020. While some changes were already in progress, many adjustments were required to adapt to the disruptions.
- Stefan Hockenberger
Many issues with industrial assets are inextricably connected to lubrication. Too little lubrication, too much or simply using the wrong product. To assess these problems and to optimize the reliability of assets, I-care has its Reliability Centered Lubrication program.
- Wouter Bogaerts
- I-Care Group